Search
Browse Categories
Mailing Lists
Join our mailing list to receive newsletters, announcements and special promotions.

IH International, Steel SFI rated 14 inch tractor pulling clutch kit , triple disc

<< Previous in Pulling tractor parts Next in Pulling tractor parts >>

Price: $2,827.00
will ship as 3 boxes by UPS approx 65 lbs each
06/17
This listing is for another option to get the power to the ground on your HOT STOCK or FARM class IH puller tractor. Features a steel flywheel, 3 friction discs with your choice of  9 or 12 pads and your choice of 11 or 13 or 27 spline IPTO hub.  Has a steel floater plates and plenty of open space around perimeter to let the heat and dust out!! Pressure plate is a 30 spring setup with new HIGH RPM DUCTILE plate. Designed to handle LOTS of POWER and High RPM's. If your tractor is running faster than HIGH third and up into overdriven speeds this is a good set up for you!!
 THE ONLY MODIFICATIONS WE SEE NEEDED WITH THIS SETUP IS 1/4 INCH TRIMMED OFF OF THE IPTO SPLINES AND A SOMETIMES A NOTCHED CROSS SHAFT BEHIND THE RELEASE BEARING.  AND IN SOME CASES ADJUSTING THE SOLENOID OR SPACING THE STARTER BACK ABOUT 1/16TH OF AN INCH to clear the ring gear!

 SFI RATED AND PROVEN ON THE TRACK!!
SEE OUR STORE HERE AND OUR COMPANY WEBSITE FOR OTHER LISTINGS AND MORE CLUTCH OPTIONS.

TOTAL PACKAGE PRICE FOR THE HIGH RPM VERSION IS $2800 FOR THE KIT WITH  9  PAD DISCS   plus shipping

$2950  FOR THE 12 PAD DISC SETUP plus shipping

ADD $$300 TO UPGRADE TO CROWER STYLE CLUTCH DISCS IN THIS SETUP  ($3127)

DEMAND AND INVENTORY CHANGES EVERY DAY!!  WE TRY TO KEEP THEM ON HAND!

  PLEASE PLAN AHEAD! WE MAY NEED TIME TO BUILD BEFORE WE DELIVER ONE OF THESE.

Ships by UPS in 3 boxes. total weight is around 195 lbs

Sold with no warranty due to the nature of tractor pulling!!  However there are plenty of people that will testify as to how well they perform.

WILL FIT THE FOLLOWING MODELS 766,886,966,986,1066,1086,1466,1486,1566,1586,3688,

BASICALLY IT WILL FIT ANY TRACTOR THAT IH PUT THE 400 SERIES ENGINE IN

AS WELL AS THE SOME THAT ARE RUNNING THE 360 ENGINE.

THIS SETUP IS ALSO AVAILABLE FOR THE 361 AND 407 ENGINES OF THE 1206, 1256 and 1456 SERIES TRACTORS. COST IS THE SAME

AND AVAILABLE FOR THE 5.9 CUMMINS ENGINE ON A BUILD AT TIME OF ORDER BASIS

WE ACCEPT PAYPAL or CCards.  IF YOU NEED IMMEDIATE SHIPMENT USE PAYPAL

MAIL A CHECK OR CALL US WITH A CCARD!!


IF YOU NEED THIS CLUTCH YOU NEED  A SUPPORT BEARING!!

WE DO OFFER AN INSTALL PACKAGE TO DISMANTLE YOUR CENTER HOUSING, INSTALL OUR PULLING TA, INSTALL LOWER BEARING SUPPORT AND

PREP THE MCV BODY FOR THE LOW PRICE OF $649 , PLUS PARTS AS NEEDED OR REQUESTED

YOU NEED TO SPLIT YOUR TRACTOR, SET AN APPOINTMENT WITH US

AND BE HERE FOR AT 8:00 AM FOR SAME DAY TURN AROUND

OR JUST DROP IT OFF AND PICK IT UP A FEW DAYS LATER IF YOU WISH!!