IH International 656, 666, 686 11" Flywheel Kit, double disc w/ HD PPlate

8/10/13
**NEW FLYWHEEL AND DOUBLE DISC CLUTCH KIT NEW**
for engine operation up to 3200 RPM
EASY INSTALL,  NO INTERNAL MODIFICATIONS REQUIRED!!
YOU MAY NEED OUR "STROKE MULTIPLIER" CLUTCH LINKAGE 
 FLYWHEEL & OVER SPRUNG PRESSURE PLATE

PRESSURE PLATE COMES  ASSEMBLED WITH HEAVY DUTY SPRINGS AND SPLINE TO DRIVE THE IPTO

 KIT INCLUDES (2) 6 PAD 10 SPLINE CLUTCH DISCS,  A STEEL FLOATER PLATE, THROWOUT BEARING,
 PILOT BEARING AND THE VERY IMPORTANT  ALIGNMENT SHAFT.


Replaces 680712C91 / 282208A1

Designed for IH 460, 544,  656, 666 & 686 Tractors  with the following engines
 D312, DT360, DT414, DT436, DT466,

This setup works well with the 300 and 400 series engines 
in the 656, 666 & 686 tractors!!!   For Hot farm, Enhanced , etc

DESIGNED TO OPERATE UNDER HIGH HORSEPOWER  IN THE FIELD AND IN PULLING CONDITIONS
 DO NOT EXCEED 3200 RPM!!!    We know we have customers running  faster than this but
IF YOU RUN HIGHER RPMS THAN THIS WE STRONGLY RECOMMEND OUR STEEL KIT

This clutch kit does require a special long spline input shaft which we build of billet steel. This will work
for TA equipped tractors,  as well as with OUR TA elimination kit (straight drive).
This Kit is built to allow you to retain the hydraulic pump and pto function of your tractor if you want or need them and to use your original starter.  This clutch setup will work in the field!!
2 pictures of  the shaft here but it is NOT included in kit price !

THIS FLYWHEEL AND CLUTCH SET UP CAN BE CUSTOM ORDERED TO FIT  INTO AND WILL WORK WELL
WITH MANY OTHER IH TRACTORS AND ENGINE COMBINATIONS
FROM 300 504, 460'S, 560 660 400, 450 544 AND BIGGER ETC.

NEW flywheel is available separately for $850 set up to run a single or double disc clutch !!!

WE ALSO MAKE A VARIATION OF THIS FLYWHEEL AND CLUTCH SETUP TO FIT THE IH - NUESS (GERMAN) 310, 358 AND 406
AS WELL AS THE CUMMINS 4BT - 3.9, 6BT - 5.9 ENGINES  AND THE IH TRUCK  501 CID
AVAILABLE IN STEEL FOR HIGH RPM OPERATION
OR SAME MATERIAL AS HERE (SAME AS FACTORY) to operate under 3500 rpm

These kits are made in limited quantities and on an as ordered basis.  We try to keep several in stock, however they are not always available for immediate shipping.
Please place your order early enough to allow some time for us to build and ship it if needed.
SHIPS AS 3 PACKAGES AND WEIGHS APPROX 110 LBS
THE SHIPPING CALCULATOR ON HERE WILL NOT BE CORRECT
SO
WHEN YOU PLACE THE ORDER ALLOW US TO SEND AN INVOICE BEFORE YOU PAY;  SO THAT THE COST WILL BE ACCURATE

SEE OUR OTHER LISTINGS HERE OR OUR  Leamantractorparts.com  WEBSITE FOR OTHER ADAPTER PLATES,  FRONT MOUNTS AND FLYWHEELS
 TO INSTALL THE 360 AND 400 SERIES ENGINES INTO THE OLDER AND SMALLER FRAME TRACTORS LIKE THE 460 560 656,  ETC!!

We ship UPS
**  our user name is our phone number  **
888-leamans   IS 888-532-6267