Search
Browse Categories
Mailing Lists
Join our mailing list to receive newsletters, announcements and special promotions.

NEW Cummins Engine Adapter 4B, 4BT 6B and 6BT for Small Frame Farmall International 686,666,656,544

<< Previous in Adaptor plates Next in Adaptor plates >>

Price: plate only
This listing is for an adapter plate to install the popular Cummins  4B, 4BT OR THE 5.9 6BT INTO the small frame IH tractors.
New Plate  to repower with 4 or 6 cylinder Cummins. From a Farmall H, SH, 300, 340, 350, 504, 460, 544, 664, 656, 666 686 etc
Built on a CNC machine and of high quality material with excellent workmanship!!  Plates are custom built of steel or aluminum
This piece is the most important of the repowering process. We can provide the front mounts but You will need to provide the other accessories and linkages yourself,
as the Cummins can come with a wide variety of mounting points for accessory's. You will also want to make sure the clearance's in other areas' work for your application.
We do have a 656 out there in a utility model with a 6BT under the hood!!
You are in many cases able to retain your sheetmetal (hoods etc) in its original position without modification.
Please let us know if your frame rails bolt on side or front of bell housing when ordering!
If from the front you will need to convert to side mounted rails like the later 656 tractors used.
We do sell weld on ends for side mounting of the rails.


In most cases we use an easily available 11 inch flywheel that uses the same 11 inch clutch parts as a 656, 666, 686 and many others.
You SHOULD BE able to use your stock starter drive in MOST applications, as the ring gear is in the exact location as factory was!
PICTURE OF THE NEW FLYWHEEL IS  POSTED.

ALL ORIGINAL TA ADJUSTMENTS AND CLUTCH CONTROLS CAN BE RETAINED.
Usually the CLUTCH parts are available over the counter at your dealer or at any number of aftermarket parts yards and clutch rebuilders.

IT ALSO MEANS OUR HIGH PERFORMANCE TA'S AND  CLUTCHES
 FOR THESE MODEL TRACTORS ARE USABLE AS WELL!!
 WE NOW HAVE AN ALL STEEL FLYWHEEL (HIGH RPM FOR TRACTOR PULLING) AVAILABLE  for approx $1800
AND AN ALL STEEL PRESSURE PLATE WITH HEAVY SPRINGS FOR $850
  WE ALSO HAVE  FLYWHEELS AVAILABLE IN  SINGLE, DOUBLE OR TRIPLE DISC CAPACITY.