| | |
| Join our mailing list to receive newsletters, announcements and special promotions.
| |
| | |
|
|
IH Farmall International 06 56 66 series drive shaft shield for Coleman axle
|
|
New and built here in the USA to match original equipment perfectly!!!
Listing is for Assembly #385834 R11 & P#385837 R1
Here is the drive shaft shield and the step that were original equipment with the IH and Farmall tractors that came from factory
with the Coleman Front Wheel Drive axle. These are almost impossible to find in good condition!
They are retired from production!!
Built in limited quantity's so get your order in now, if we run out it can be a 30 day wait till we get restocked
The advertised part numbers are for the Gear drive tractors!!
If you want a straight backed top plate on the shield 385838 R11 please advise us of that. They will be delayed a bit (30 days max)
Seems like the straight backed plate was found on the 06 and 56 series tractors, however if you ordered one
later it would come with the notch as the one pictured is built.
The shields all (gear or hydro) have the same part number but the 385838 R21 apparently is shaped like the ones we
built! These are correct for any of the tractors but were produced after 1972 from what we can tell.
If you look at the picture of the parts breakdown you will see the shield was available as part of an assembly
and individually. Contact us for individual parts. The following is copied from the text of the parts book.
| 44
|
1
|
385834R11
|
SUPPORT/Retired
|
SUPPORT ASSY, shield & step
|
|
|
45
|
1
|
385837R1
|
SUPPORT/Retired
|
SUPPORT, shield, gear drive tractors
|
|
|
45
|
1
|
533197R1
|
SUPPORT/Retired
|
SUPPORT, shield, hydrostatic drive tractors
|
|
|
|
1
|
674733R1
|
SPACER
|
SPACER, shield support, hydrostatic drive tractors
|
|
|
46
|
1
|
385838R21
|
SHIELD/Retired
|
SHIELD ASSY, safety
|
|
|
|
6
|
179812
|
BOLT
|
SCREW 5/16-18 x 1/2 hex-hd cap
|
|
|
|
6
|
375250R1
|
SCREW
|
SCREW, 5/8-11 x 2-1/4 twelve-pt cap, thru clutch housing, rear frame, shield and step
|
|
|
|
1
|
271563
|
BOLT
|
SCREW, 5/8-11 x 2-/14 hex-hd cap, clutch housing to rear frame
|
|
|
|
2
|
271607
|
BOLT
|
SCREW, 3/4-10 x 1-1/2 hex-hd cap
|
|
|
|
1
|
103325
|
WASHER, LOCK
|
WASHER, LOCK, 5/8"
|
OUR listing is for 3 pieces, The assembly 385834R11 which is (#44) and includes # (46) 385838R21;
as well as the support (#45) for gear drive tractors P# 385837R1
For you guys with hydro's the support (533197R1) # 45 and the spacer #674733 R1
for the shield will be available in about 30 days. No other hardware is included.
Our guarantee on these parts is that if you don't like them better than your money just send them back for a full refund of first cost!!
|
|
|