Search
Browse Categories
Mailing Lists
Join our mailing list to receive newsletters, announcements and special promotions.

8.3 Cummins Adapter & Flywheel to International IH 1466 1486 1586 6588 4186

<< Previous in Adaptor plates Next in Adaptor plates >>

Price: call about options and pricing
Part Number: 66 8.3
Manufacturer: Leaman
12/22
This listing is for an adapter plate and a new flywheel to install the Cummins 8.3TA C series engine

INTO THE LARGE FRAME IH TRACTORS
This will fit the 66, and 86 series, and the 2+2's from the 3388 all the way to the 6788
It is the same width and shape as the factory plate so it looks like a factory fit!!
Should also work fine for the 4100, 4156, 4166 and 4186
Custom built of Aluminum alloy or steel  (special order) and priced here with a new 14 inch flywheel, This flywheel can be setup with double disc and a 21 spring pressure plate.
This is a conversion that we thought would be appealing to some for high HP, PTO and tillage work. The 8.3 makes enough power that it is probably not a good fit
in many tractors that it could be bolted into.  I believe the 1566, 1586, 3588 and 3788, the 6588 and 6788 as well as the solid frame 4WD like the
4156, 4166 and 4186 could hold the power and provide additional performance with this engine. However this is uncharted waters for us and there will be some
clearance problems to deal with and various front mounts designed and even frame rails may be needing modified in some of the tractors.  The tractors mentioned above have
stronger pto drive gears than the smaller frame versions of their respective series. In addition the 15's have a heavy ring and pinion as well as rear axle planetary's that have a lot in common with the Magnums,  I believe they would be a great candidate for the 8.3.  As for the 2+2's; they have the power split between two axles and with a careful operator should hold up as well. In today's world there are improvements that have been developed to improve these tractors dramatically, Better hydraulic pumps and filtering systems, TA's that will stand 10 times what the originals were good for, double disc clutches, pto clutch pacs that are amazing.
This can make a tractor that you already own into something that can do the job, instead of spending 100K for something built of plastic that requires a computer class just to run it.


On this 8.3 conversion we recommend a double disc clutch set up if you are going to put the power through the wheels and driveline.
We have been able to put together a double disc and 14 inch wheel that fits into the bell housing on most of  the models listed below and allows full use of the TA and the PTO . And we have put together pto drive gear updates that have extended the life of the gears in extreme use situations that are simple to install and they work!

FIND OUR WEBSITE OR LOOK AT OUR OTHER LISTINGS HERE TO FIND MORE UNIQUE IMPROVEMENTS TO THE IH TRACTOR LINE

We originally built this plate to accommodate some tractor puller interest and it will allow the 8.3 to be bolted into tractors as old as the 1963, 706 and 806's


WE CAN SELL YOU THE PLATE ONLY IF YOU LIKE.

This particular plate and flywheel will bolt right into the following models.

706 through the 1206; 756 through the 1456
766, 866, 966, 1066, 1466, 1566, 1568 786, 886, 986, 1086, 1486, 1586,
3088, 3288, 3488, 3688, 3388, 3588, 3788, 6388, 6588, 6788,
THIS PLATE IS APPROXIMATELY 2 INCHES WIDER THAN THE BELL HOUSING YOU WILL NEED THE WIDETH TO KEEP THE FRAME RAILS OUT WIDE ENOUGH TO CLEAR THE FRONT TIMING COVER
You SHOULD BE able to use your stock diesel starter as the ring gear is in the exact location as factory was!

You will need to provide the front mounts and the other accessories and linkages yourself, as the
Cummins can come with a wide variety of mounting points for accessory's
You will also want to make sure the clearance's in other areas work for your application.
The left front side at the timing cover will need modified in some cases. Or the frame rail needs adjusted.


THIS LISTING IS FOR THE ADAPTER PLATE AND THE FLYWHEEL ONLY
pricing on various clutch options available and discounted with a purchase here
Stay tuned or contact us for more info

717-464-2874
We will ship by ups IN 2 OVERSIZE PKGS