| | |
| Join our mailing list to receive newsletters, announcements and special promotions.
| |
| | |
|
|
Home > Engine > Adaptor plates > Adapter plate, new flywheel & front mounts for Cummins B series into IH diesel models 806 to 1206, 756 to 1456, 826 gear drive
Adapter plate, new flywheel & front mounts for Cummins B series into IH diesel models 806 to 1206, 756 to 1456, 826 gear drive
|
Price: Call for Pricing on options
Part Number: 806 C
|
revised 6/17
DETAILS ABOUT OUR THREE PIECE KIT Adapter plate & new 14" flywheel to repower IH 06, and 56 series diesel powered tractors with Cummins 5.9 / 6-BT or 3.9 / 4BT engines. This listing is for an adapter plate, a new flywheel and front mounts to repower with the popular Cummins B series. PLEASE NOTE THAT IF YOU PLAN TO USE A 4BT IT MUST BE A BALANCED ENGINE !!!
Our plate is a precision built piece that fits the profile of the bell housing properly and looks like an original part. You can be assured the alignment is correct, They are built on a late model CNC machine and designed to use the original dial pins on the bell housing side and the cummins style on the engine side so that everything runs true. This kit is built with pride here in the US and is designed for appearance as well as strengeth. Will be a repower that you can be proud of and that will pay for itself in fuel savings and added value to the tractor. THESE PLATES ARE BUILT TO ENSURE YOUR FRAME RAILS END UP IN THE SAME LOCATION AS THE ORIGINALS SO THAT YOUR SHEET METAL WILL LINE UP CORRECTLY AND THE ENGINE WILL LOOK LIKE IT WAS THERE FROM NEW. In the event you are repowering a 756-D, 826-D or a long frame 706-D that came factory with the German D-310 (Nuess) you will need to buy our frame rail extender / spacer in addition to this kit to make the hoods fit properly. They are listed seperately here on this website.
The plate is built of Aluminum alloy or steel (By special order) comes with a new 14 inch flywheel and front mounts,
This flywheel is built so that you can run your starter in most all applications named here and use stock IH clutch parts including the throwout and pilot bearing etc.. These are common over the counter parts from your local dealer, We use the same 14 inch clutch kit as a 1206 which had 12 springs and therefore an easier pedal, or the1456 which had a 15 spring pressure plate and works best with a hydraulic clutch assist.. ALL ORIGINAL ADJUSTMENTS AND CLUTCH CONTROLS ARE RETAINED. If you are starting with a tractor that had the 12 inch flywheel set up (like the 806 and 856 etc) this will be an improvement and provide a stronger clutch as well.
This kit (plate, mts and the larger 14 inch wheel) fits ALL of the models as detailed and listed below. 706 w/310 Diesel, 806-D, 1206, 756-D, 856-D,1256,1456, and 826-D gear drive. IF YOUR TRACTOR MODEL IS LISTED ABOVE BUT IS POWERED BY EITHER A GAS ENGINE OR IS AN EARLY 706 DIESEL WITH THE GLOW PLUG DIESEL (282) PLEASE SEE OUR OTHER LISTINGS OR CALL FOR INFORMATION, WE HAVE THE KITS AVAILABLE AND LISTED HERE ON THIS SITE. SAME DEAL FOR THE HYDRO DRIVE 826 AND 1026 TRACTORS. THESE PARTS ARE ALSO OFFERED INDIVIDUALLY ON THIS SITE, EMAIL US IF YOU ARE UNCERTAIN OF THE APPLICATION
WE ALSO SELL GOOD QUALITY NEW RADIATORS WITH THE LOWER RETURN OUTLET ON THE CORRECT (RIGHT) SIDE. THIS SAVES TIME AND MAKES SENSE AS IT ELIMINATES THE NEED FOR A HOME MADE CROSS TUBE AND ENSURES THAT YOUR ENGINE WILL STAY PROPERLY COOLED. THESE WILL BOLT IN THE SAME AS YOUR ORIGINAL RADIATOR AND IN MOST CASES YOUR SHROUD WILL BE A DIRECT BOLT ON AS WELL, SPECIAL PRICES WHEN BOUGHT WITH A KIT.
WE ALSO HAVE A COMPLETE LINE OF COMPETITIVELY PRICED CLUTCHES IN STOCK HERE IN PA
AND FOR THOSE THAT WANT TO HOT ROD OR TRACTOR PULL YOU WILL BE GLAD TO KNOW THAT MOST OF THE HIGH PERFORMANCE TA'S AND DOUBLE AND TRIPLE DISC CLUTCHES WE SELL FOR IH TRACTORS ARE AVAILABLE TO WORK WITH THIS CONVERSION
ALUMINUM PLATE WEIGHS APPROX 40 LBS, STEEL WEIGHS CLOSE TO 100 LBS Fly wheel makes second package of approx 80 lbs front mounts weigh about 7 lbs
|
|
|