ADAPTER plate for Cummins 4BT or 6BT engine into Farmall M SM 400 560 660 etc.

These have the area where the frame rails anchor machined down to the original thickness
of the stock engine plate. This puts the frame rails in their original location so that the sheetmetal will fit.


This plate will work on about anything from an M, SM, SMTA, 400,450, 560, 660, W400, W450 AND 706 W/ D-282
 AND ALL THE GAS VERSIONS OF THE 706, 806, 756, 856, 826, 766

T
FOR FARMALL AND IH TRACTORS BUILT BEFORE 1963 USING THIS PLATE WE NOW OFFER A STEEL ONE PIECE FLYWHEEL
AND AN  ALL STEEL PRESSURE PLATE  IN ADDITION TO THE  COST CUTTING
 MODIFIED FLYWHEEL AND CUSTOM SPACER TO FIT ONTO THE CUMMINS CRANK PATTERN!
ALLOWS US TO RETAIN THE STOCK STARTER AND TO USE AN IH CLUTCH SETUP; IN 11 or 12 INCH
You are able to retain the TA and live PTO as well.



FOR THE TRACTORS BUILT AFTER 1963 WE ARE ABLE TO OFFER A NEW FACTORY LIKE  12"
AND A 14 INCH FLYWHEEL WHICH IS  REPATTERNED TO  BOLT TO THE CRANK

WITH OUR PLATE AND FLYWHEEL'S; ALL ORIGINAL TA FUNCTIONS AND CLUTCH CONTROLS ARE RETAINED.

This means the CLUTCH parts are available over the counter at your dealer or
at any number of aftermarket parts yards and clutch rebuilders.

WE CAN PROVIDE HIGH PERFORMANCE TA'S AND DOUBLE AND OR TRIPLE DISC CLUTCHES FOR THESE!

 
SHIPPING FOR ALUMINUM WILL BE 3 8LBS 
STEEL IS SPECIAL ORDER ONLY AND APPROX 100 #'S
WE DO HAVE A COMPLETE LINE OF CLUTCHES IN STOCK HERE IN PA
AND CAN SHIP SAME FROM IOWA WAREHOUSE IF YOU LIVE IN THE MIDWEST!!